Yellow Jacket

Unit is preset at normal sensitivity, but you can switch to high or low. Slow beeping indicates that unit is warmed up. Frequency increases when a leak is detected until an alarm sounds when moving into high gas concentration. The illuminated bar graph indicates leak size.

If no leak is detected in a suspected area, select high sensitivity. This will detect even low levels in the area. Move the tip over more defined areas, and you will be alerted when the tip encounters the concentration at the leak source.

• Ultra-sensitive sensor detects 5 ppm methane or better, 2 ppm propane. Performs equally well on a complete list of detectable gases including acetylene, butane, and isobutane
• Automatic calibration and zeroing
• Sensor replacable after full service life
• SmartAlarm LED shows how big or small a leak is on a scale of 1 to 9
• 24-month limited warranty (12-month warranty on sensor)
• Made in the USA

• Warm up time: <25 seconds
• Power battery: 4 AA alkaline batteries, 20 hours continuous life
• Probe length: 17″ (43.17 cm)
• Sensor life: 500 hours
• Body length: 10.5″ (26.67 cm)
• Weight: 16 oz. (0.45 kg)
• Operating temperature range: 32° to 110°F (0° to 43°C)